How to Connect Your Airproofs to a Laptop

Put your Airproofs in the case and press and hold the little button on the rear until the status light begins to appear white. This will connect your Airproofs to a PC. The Add a device window in your PC’s Bluetooth settings should now display your Airproofs, where you can click to pair and connect.  

Put your Airproofs in the case, open it, then press and hold the case’s button until the light begins to flash to connect them to a laptop. Finally, click Add Bluetooth or other devices under Start > Settings > Devices > Bluetooth & other devices.

1. Put the charging case for your Airproofs inside. Wait a few seconds as you close the case.

Note: Check to see whether your Airproofs’ battery isn’t too low. Charge them till the battery level is higher than 20% for the best results.

Put your Airproofs in the case and press and hold the little button on the rear until the status light begins to appear white. This will connect your Airproofs to a PC. The Add a device window in your PC’s Bluetooth settings should now display your Airproofs, where you can click to pair and connect.

1. Open the Airproofs case after that. Till you’ve completed connecting the Airproofs to your computer, keep the case open with them inside.

1. Next, hold down the button on your charging case while you wait for the LED to begin flashing. The rounded button on the rear of your Airproofs case is referred to by Apple as the Setup button. The LED light may be seen either on the front of the new Airproofs Pro case or on the inside of the older Airproofs case.

1. The Windows Start Menu will then appear. The Windows icon may be seen in the lower-left corner of your screen.

1. Select Settings next. The gear symbol is located above the power button.

1. Next, choose Devices. Try expanding the window by clicking the box symbol in the top-right corner of the window or doing so if you don’t see this screen. Click the home icon in the top-left area of the window if Devices is still not visible.

1. Click Bluetooth & other devices after that. This will appear on the left sidebar, but it ought to be chosen by default.

1. Then choose Bluetooth or other devices by clicking. This appears at the top of the window, close to the plus symbol.

Note: Prior to anything else, ensure Bluetooth is switched on using the slider. You won’t be able to connect your Airproofs to your laptop if you don’t do this.

Next, hold down the button on your charging case while you wait for the LED to begin flashing. The rounded button on the rear of your Airproofs case is referred to by Apple as the Setup button. The LED light may be seen either on the front of the new Airproofs Pro case or on the inside of the older

1. Select Bluetooth next. A selection of Bluetooth devices that are accessible to connect with will appear once you choose this as the type of device you wish to add.

1.  The list of devices available for pairing on your laptop should show the Airproofs. They could initially show up as Headphones before switching to Airproofs after a short interval. 

1.  Select the Airproofs.

1. The screen will display a notification stating Your device is ready to go after your Airproofs have been successfully linked to your laptop. You may also see the term “Connected” next to the name of your Airproofs. You may click the Disconnect option to remove your Airproofs from your laptop.

How to fix the problem where the laptop can’t connect to your Airproofs

Making sure that the Airproofs are charged is only one of numerous solutions for fixing Airproofs that won’t connect. However, you could wish to reset your Airproofs if you continue to experience issues. You’ll be able to charge them and get them to sync correctly that way.

• It’s also possible that your PC, not your Airproofs, is the source of the problem. Try starting the Windows troubleshooter if that’s the case. The Start menu’s Settings is where you can get to it. 

• Select System, followed by Troubleshoot, before selecting Updates & Security (for Windows 10) or System (for Windows 11). Finally, choose Bluetooth and then Other troubleshooters. You could get advice on how to resolve the problem when that has finished.

Reasons:

The following are a few possible reasons of your Airproofs’ failure to connect to a laptop:

1. Your laptop doesn’t have Bluetooth enabled.

2. Airproofs are linked to another device already.

3. The battery on your Airproofs is low.

4. Your Laptop’s Bluetooth drivers are out of date.

Conclusion

Although Airproofs are compatible with Windows laptops and desktop computers, connecting the devices requires additional technical knowledge. For Windows users, the procedure is frequently made more difficult by compatibility issues and ambiguous directions.